Description

Vibratory Motor
The vibrator motor is a mechanism that produces powerful vibration of centrifugal force by rotating both ends of eccentric weights connected to the rotor axis. By changing the eccentric weights when the motors are in a standstill state, the value of these centrifugal forces can be adjusted. When used as a single unit, they impact circular vibrations. Two vibrators running in the reverse direction should be used if linear vibrations are required.
• Rugged construction to withstand tough environments
• Motor winding is vacuum impregnated
• Completely dustproof air-cooled design to operate in dusty environments. Complies with IP55 specification
• F-Class winding: Impervious to dust, moisture, and vibrations
• Terminal box connector sealed with a layer of resin to prevent damage due to vibrations
• Vibration force adjustable from zero to maximum by fine-tuning the position of unbalance weights provided on both sides of the motor shaft
• Driveshaft made from oversized alloy steel to withstand stress at high speeds
• Body made from high-grade SG Iron material for bigger & Cast Iron for smaller sizes.
• Maintenance-free sealed imported pre-lubricated heavy bearings
• The amplitude of vibration can be controlled
• Noise-free performance
• Thermal overload protection:
• 3 PTC (Positive thermal coefficient) Thermistor 130°C for bigger sizes.
• 3 TOP (Thermal overload protector) bi-metallic switch 145°C for smaller sizes
• Permanent and legible markings for the settings of the unbalance weights